Conventional

MS-2 is a two zone conventional fire alarm control panel compatible with the new I3 smoke detectors from System Sensor, and provides such advanced features as drift compensation, maintenance alert, and freeze warning. Automatic synchronization of audio/visual devices is provided, using manufacturer protocol for System Sensor, Wheelock and Gentex appliances. The NAC protocol includes the ability to silence audible devices while strobes continue to flash, using only a single pair of wires.
Features and Benefits

Two initiating zones compatible with 2- and 4-wire smoke detectors, one zone programmable for combo, supervisory and waterflow

One Notification Appliance Circuit (NAC) with built-in horn/strobe synchronization for System Sensor®, Wheelock® or Gentex® with selectable silence

3.0 amps total usable current

MS-4 is a four zone conventional fire alarm control panel compatible with the new I3 smoke detectors from System Sensor, and provides such advanced features as drift compensation, maintenance alert, and freeze warning. Automatic synchronization of audio/visual devices is provided, using manufacturer protocol for System Sensor, Wheelock and Gentex appliances. The NAC protocol includes the ability to silence audible devices while strobes continue to flash, using only a single pair of wires.
Features and Benefits

Four initiating zones compatible with 2- and 4-wire smoke detectors, one zone programmable for combo, supervisory and waterflow
Two NACs with built-in horn/strobe synchronization for System Sensor®, Wheelock® or Gentex® with selectable silence
Optional module to convert all four initiating zones and two NACs to Class A

Compatible with System Sensor’s smoke detectors, providing “EZ Walk Test” and a Remote Maintenance Signal (panel is offered as i3 Ready, no additional modules needed)

3.0 amps total usable current and expandable to 6.0 amps total with optional second transformer

Options include a plug-in 4XTMF transmitter module, a 4XLMF module to support LED annunciators and a plug-in 4XZMF zone relay module

MS-5UD-3 is a five zone conventional fire control panel has features normally found in more expensive addressable systems. The MS-5UD-3 is fully programmable via built-in keypad and 80 character LCD display, so you do not need an external programmer. The five zones panel has a built-in Digital Alarm Communicator Transmitter (DACT) and availability to add optional equipment: Remote annunciator, Relay module, LED Driver module, Transmitter module and Printer interface module.
Features and Benefits

Five-zone Style B (Class B) or Five-zone Style D (Class A) with optional module

Four NAC Circuits Style Y (Class B) or Four NAC Circuits Style Z (Class A) with optional modules

Built-in NAC synchronization for System Sensor, Wheelock, Gentex, Faraday and Amseco devices

Integral 80 character LCD display with backlighting and keypad

Annunciator bus supports up to 8 devices, including ANN-80 LCD Remote Annunciator, ANN-S/PG remote serial or parallel printer gateway, ANN-RLY, 10 form C relay board, ANN-LED Zone annunciator and ANN-I/O LED driver board for graphic annunciators

Built-in two-line digital communicator for off premises monitoring

Three Form-C programmable relays

3.0 amps total usable current

MS-10UD-7 is a ten zone conventional fire control panel has features normally found in more expensive addressable systems. The MS-10UD-7 is fully programmable via built-in keypad and 80 character LCD display, so you do not need an external programmer. The ten zones panel has a built-in Digital Alarm Communicator Transmitter (DACT) and availability to add optional equipment: Remote annunciator, Relay module, LED Driver module, Transmitter module and Printer interface module.
Features and Benefits

Ten-zone Style B (Class B) or Five-zone Style D (Class A) with optional module

Four NAC Circuits Style Y (Class B) or Four NAC Circuits Style Z (Class A) with optional modules

Built-in NAC synchronization for System Sensor, Wheelock, Gentex, Faraday and Amseco devices

Built in programmer: Integral 80 character LCD display with backlighting and keypad

Built-in two-line digital communicator for off premises monitoring

Three Form-C programmable relays

7.0 amps total usable current

The BG-12 series from Fire-Lite Alarms is a cost-effective, feature-packed, non-coded series of manual fire alarm pull stations. They offer a variety of different models including single- and dual-action versions. The BG-12 series were designed specifically for use in multiple applications and offer the flexibility to meet the needs of both the installer and end-user.

BG-12 Series Features and Benefits

Aesthetically pleasing, highly visible design and color.

Attractive contoured shape and light textured finish.

Easily operated(single- or dual-action), yet designed to prevent false alarms when bumped, shaken, or jarred.

PUSH IN/PULL DOWN handle latches in the down position to clearly indicate the station has been operated.

Multiple hex- and key-lock models available.

Station can be opened for inspection and maintenance without initiating an alarm.

The words “NORMAL” and “ACTIVATED” are molded into the plastic adjacent to the alarm switch (located inside).

Backplate is large enough to overlap a single-gang backbox cutout by 1/2" (1.27 cm).

Spanish versions (FUEGO) available (BG-12LSP, BG-12LPSP).

Can be surface-mounted (with SB-10 or SB-I/O) or semi-flush mounted. Semi-flush mount to a standard single-gang, double-gang, or 4" (10.16 cm) square electrical box.

Comments are closed.

Home » Conventional

Conventional

Control Panels (Conventional)

BG-12 Series - Pull Stations